Wouldn’t It Be Nice If You Could Fix Problems Before They Occur?

WouldntBeNiceThermal

You can!  Discover problems within your electrical systems before they occur with the technology of infrared thermal imaging. While there is not a single electrical preventative maintenance program or field of study that can catch all problems, the most reliable and cost-effective inspection to have conducted is Thermal Imaging. It is a non-contact, non-destructive technology proven effective in the early detection of imminent failure in electrical and mechanical systems.

There are many benefits of Thermal imaging. For one, Thermal Imaging improves the safety standards of your workspace and can detect a potential problem early so no employees get hurt in a possible accident. An overloaded circuit is one of the most common types of defects that leads to fires and can be detected with infrared scanning. Stopping this sooner than later is highly important. Two, it can help to reduce downtime from failed equipment and decrease the time you spend on replacing those systems because you can plan for it. If Thermal Imaging can detect the problem early, you can adjust what you need to so it won’t become completely useless and need a replacement. Detecting problems early can also allow you to save money because paying for the services of thermal imaging is a lot cheaper than having to replace an entire electrical panel or circuit breaker system. Three, the process of thermal imaging is quick and easy, there is no need for lengthy preparations or pre-inspection work. A typical thermal imaging scan involves: walking in, scanning the different systems, looking for “hot spots”, and collecting data. It’s that easy.

A couple other things to consider would be our extensive work that goes above and beyond what our competitors do along with how dependable and reliable we are to you the customer. We at Thompson have certified Thermographers that go beyond their normal walkthroughs and actually take the time to scan each system to collect the valuable data in order to keep your facility safe. This helps to avoid any possible equipment failure or unnecessary downtime.

For any more questions or concerns regarding our thermal imaging services please don’t be afraid to call us at 866.258.8462 email us at help@thompsoninnovation.com, or visit our website at https://thompsoninnovation.com/

 

Three Things You Can Do to Keep Your Facility Safe

NFPA70E-BoxChecking-Blog

Thompson Knows Electrical Safety. We want to inform you of three things that you can do to stay safe.

First, in order to keep your facility safe, it is important to have routine Thermal Imaging inspections completed. You should have this done by certified Thermographers that know and have experience on what they are doing. Once the Thermographers have looked at your equipment, you should then take a look at the digital and thermal images so you can see where the weak areas of your systems are. It is important to get those looked at and fixed so you can avoid any problems that could occur. Optimizing your equipment will make them more productive and more efficient.

Second, staying up-to-date with NFPA 70E and OSHA standards is also an important part of Electrical Safety. Falling below the line of the requirements can make your facility at risk for an accident. Training your employees on the standards will be important for their own safety as well. Your company can’t be very productive if you don’t have any knowledgeable employees around. By staying compliant with the requirements and standards of OSHA, you will keep your facility safe which in the long run will keep your employee’s safe while on the job.

Third, is getting an Arc Flash Risk Assessment completed. This form of Electrical safety is an important one as there can be many dangers that could occur from the result of an Arc Flash. Some of these include shrapnel wounds, high degree burns, blindness, and even death. You will need to have your equipment labeled in compliance with the OSHA and NFPA standards, this will make you aware of the protections that you need when servicing the pieces of equipment that are at risk. Having a risk assessment completed will inform you on what to do.

Don’t miss out on these opportunities to make your facilities better. Go to Thompson for all of your Electrical Safety needs. We have certified Thermographers, Trainers, and experts in Arc Flash to help you with any Electrical Safety needs. Contact us today. Our information is:

Phone: 866.258.8462

Email: help@thompsoninnovation.com

Website: www.thompsoninnovation.com

Tips for Employee and Workplace Safety

SafetyBlog

Every minute of the day approximately 5 people get injured on the job.  By the end of each day approximately 12 people will have died because of working in an unsafe environment.  Focusing on workplace safety is critical in protecting your employees and your company. There are many things that can be done to help lower workplace environment risk, encourage your employees to work safely and that make sure that everyone goes home alive at the end of each day.

One of the most effective ways to stay safe is implementing OSHA guidelines. OSHA stands for Occupational Safety and Health Administration.  Years of data and experience have gone into the safety guidelines and requirements that OSHA oversees.  While this can create challenges for businesses, guidelines and requirements are designed to reduce the number of accidents that occur and prevent injury for others. Having a checklist to sort out your workplace safety hazards can be very beneficial to make sure all loose ends are tied up. Training employees on safety is key.  It impacts the environment they work in and the people they work with every day. Not having employees properly trained leaves your business at serious risk for accidents. Staying compliant may save a life!  That life may be yours.

Securing your facility is another form of protection. Life safety begins with having smoke, heat, and carbon dioxide detectors. Video surveillance and entry intercoms can also help protect you from any vandalism that could happen or keep unwanted visitors out. Access control can help to protect your critical assets while technology such as uninterrupted power supplies can ensure that your critical assets remain operational during unplanned outages. Keeping your employees and facilities safe and operational is mission critical for every business.

Thompson Innovation specializes in the overall life safety and security solutions your company can benefit from.  Contact us today for more information on ways we can help or visit our website!

Phone: 866.258.8462

Website:  https://thompsoninnovation.net/home.html

Four Steps to Build an Innovative Platform for your Business

TI_Logo-FINAL-01Thinking outside the box tends to be the best way to have that big breakthrough. Many ideas that you have could fail to take off, not because of bad ideas but simply because innovation depends on the success of the product just as much as the idea itself. This is why having an effective innovation platform will help you along the way. We have 4 steps that can assist you in your ventures.

Step 1. Understand why you should innovate. Markets in this economy are always changing so it is very important that you stay up-to-date with the latest trends. There are different types of innovation that you can apply to your business, these include: product innovation, process innovation, marketing innovation, and organizational innovation. These types of innovation can help you find your “why”.

 Step 2. Acknowledge ideas from any place. Whether its customer feedback, employees, partners, or the executive team, anyone can help give you that great idea. This means that you might have to monitor your customer service lines to hear feedback. Maybe you have a suggestion box in the office to hear from your employees. Host fun and friendly competitions with rewards around the office to boost and motivate your workers to be creative. All of these can generate the opportunity for an idea to be born.

Step 3. Hire or train new employees in different areas. If you see a gap in you company between growth and capability then it might be time to look outside for help or look to the veterans for their experience. Hiring outside help, even if it is a short-term contractor, can bring in a new perspective that your employees can learn and adopt. Look to your veterans who might not have previously voiced their opinion but can give you beneficial information on what they think would be better for the company. Sometimes people are too shy about speaking their mind, so you should ask. Who knows maybe the next big idea is sitting in your own building.

Step 4. Choose your processes and tools wisely. There are a couple different ways to go about doing this. Some of the processes are, closed innovation which is doing things all in-house. Collaborative innovation is working with your closest partners. Open innovation is being open to customer feedback and ideas. Lastly, a co-innovator is partnering with another business to develop something that you couldn’t do on your own. The tools are the structure and the methods you use to implement these strategies. Any type of innovation can involve risk but having a plan in place can make the process a lot smoother.

Thompson Innovation is here to help make your business more innovative. Contact us to learn more about ways to kickstart innovation and improve your operations.

Phone: 712-224-3800

Website: www.Thompsoninnovation.net

Exciting Announcement

LaunchPhotos-Day-2-FB

On May 22, 2018, Electric Innovations and its sister company Thompson Automation and Specialty Services were brought together as a stronger and even more dynamic technology integration company called Thompson Innovation.

Our strategic plan has always been focused on strengthening the technical capabilities and portfolio of solutions we can offer to our customers. This is another step in fulfilling our Corporate Mission: “To be the prime solution provider as recognized by our employees, customers and the communities we serve.”

Under the direction of General Managers, Tasha Barker and Jason Glover, Thompson Innovation will continue to passionately lead our solutions teams in:

  • Managed IT & Software
  • Life Safety & Security
  • Automation & Robotics
  • Electrical Safety & Preventative Maintenance

The addition of solutions previously provided by Thompson Automation and Specialty Services strengthens our ability to meet current and new customer’s needs as one company. For more information contact Thompson Innovation at 712-224-3800 or visit us at www.thompsoninnovation.net

Three Things You Can Do to Keep Your Facility Safe

NFPA70E-BoxChecking-Blog

May is Electrical Safety Month. Lucky for you, Thompson specializes in Electrical Safety. During this time, we want to inform you on three things that you can do to stay safe.

First, in order to keep your facility safe, it is important to have routine Thermal Imaging inspections completed. You should have this done by certified Thermographers that know and have experience on what they are doing. Once the Thermographers have looked at your equipment, you should then take a look at the digital and thermal images so you can see where the weak areas of your systems are. It is important to get those looked at and fixed so you can avoid any problems that could occur. Optimizing your equipment will make them more productive and more efficient.

Second, staying up-to-date with NFPA 70E and OSHA standards is also an important part of Electrical Safety. Falling below the line of the requirements can make your facility at risk for an accident. Training your employees on the standards will be important for their own safety as well. Your company can’t be very productive if you don’t have any knowledgeable employees around. By staying compliant with the requirements and standards of OSHA, you will keep your facility safe which in the long run will keep your employee’s safe while on the job.

Third, is getting an Arc Flash Risk Assessment completed. This form of Electrical safety is an important one as there can be many dangers that could occur from the result of an Arc Flash. Some of these include shrapnel wounds, high degree burns, blindness, and even death. You will need to have your equipment labeled in compliance with the OSHA and NFPA standards, this will make you aware of the protections that you need when servicing the pieces of equipment that are at risk. Having a risk assessment completed will inform you on what to do.

Don’t miss out on these opportunities to make your facilities better. Go to Thompson for all of your Electrical Safety needs. We have certified Thermographers, Trainers, and experts in Arc Flash to help you with any Electrical Safety needs. Contact us today. Our information is:

Phone: 844.321.3869

Email: help@thompsonspecialty.com

Website: www.thompsonspecialty.com

Keep Your Electrical Gear Clean and Tight

Electrical failures often can be avoided, and good preventative maintenance programs can help predict the imminent failure of equipment.  According to the Institute of Electrical and Electronics Engineers (IEEE), the failure rate of electrical equipment is three times higher when electrical preventive maintenance programs are not performed. This tells us that electrical failures can be avoided.

What should be included in an excellent electrical preventative maintenance program (EPM)? There are so many things that could be done such as: Equipment maintenance, cleaning, and thermal imaging.  However, where does one put the priority?  You have to consider the top causes of failure in electrical systems and these include: loose connections, improperly installed parts, defective/inadequate insulation, foreign objects causing short-circuiting, overloading inadequate capacity, and the accumulation of dust, dirt, and oil.  All things that can be prevented with routine and systemic electrical inspections.

Common in all these causes of electrical equipment failure is gear not being clean and well maintained.  Here are four things to keep in mind when developing an EPM program.

First, keep your gear clean. The buildup of dirt and metal debris in an electrical enclosure can cause arcing and arc flash explosions.  A second issue brought about by the accumulation of dirt and debris is an increase in heat and the temperature of the electrical equipment. Third, restricted airflow and an increase in the temperature of gear grossgearthompsondecreases the quality and usable life of the equipment.  Finally, a dirty environment also creates a hospitable home for rodents and vermin. We aren’t kidding, we really have found rodents in electrical gear. Dust is not your only enemy in dirty environments, so keep it clean.

Keep your gear tight. Loose connections are a major cause of electrical failures. More than 75% of the problems uncovered during routine thermal imaging inspections are loose connections. Thermography (infrared scanning) is a common way to identify areas that need repair but must be done while the gear is energized.  While the gear is off and being cleaned why not take an extra minute to check and tighten those loose connections?

If you have more questions or are looking for ideas and more information on best practice electrical preventative maintenance programs give the experts at Thompson Automation and Specialty Services a call today. They are ready and willing to help out in any way that they can.

Phone: 844.321.3869

Website: www.thompsonspecialty.com

Email: help@thompsonspecialty.com

Wouldn’t It Be Nice If You Could Fix Problems Before They Occur?

Corey-Mike-Infrared-MC

You can!  Discover problems within your electrical systems before they occur with the technology of infrared thermal imaging. While there is not a single electrical preventative maintenance program or field of study that can catch all problems, the most reliable and cost-effective inspection to have conducted is Thermal Imaging. It is a non-contact, non-destructive technology proven effective in the early detection of imminent failure in electrical and mechanical systems.

There are many benefits of Thermal imaging. For one, Thermal Imaging improves the safety standards of your workspace and can detect a potential problem early so no employees get hurt in a possible accident. An overloaded circuit is one of the most common types of defects that leads to fires and can be detected with infrared scanning. Stopping this sooner than later is highly important. Two, it can help to reduce downtime from failed equipment and decrease the time you spend on replacing those systems because you can plan for it. If Thermal Imaging can detect the problem early, you can adjust what you need to so it won’t become completely useless and need a replacement. Detecting problems early can also allow you to save money because paying for the services of thermal imaging is a lot cheaper than having to replace an entire electrical panel or circuit breaker system. Three, the process of thermal imaging is quick and easy, there is no need for lengthy preparations or pre-inspection work. A typical thermal imaging scan involves: walking in, scanning the different systems, looking for “hot spots”, and collecting data. It’s that easy.

A couple other things to consider would be our extensive work that goes above and beyond what our competitors do along with how dependable and reliable we are to you the customer. We at Thompson have certified Thermographers that go beyond their normal walkthroughs and actually take the time to scan each system to collect the valuable data in order to keep your facility safe. This helps to avoid any possible equipment failure or unnecessary downtime.

For any more questions or concerns regarding our thermal imaging services please don’t be afraid to call us at 844.321.3869, emails us at help@thompsonspecialty.com, or visit our website at https://www.thompsonspecialty.com/home.html

It’s time you had an Arc Flash study done

areyoureadybutton1

Are you ready for the new OSHA electrical safety requirements? Do you feel prepared? Have you had your Arc Flash Risk Assessment complete? If the answer is no then it is time to get started. “What is an Arc Flash?” this is one of the most frequently asked questions. An Arc Flash occurs because of a release of energy caused by an electrical arc, resulting in an explosion. The flash can reach temperatures up to 35,000 degrees Fahrenheit.

One of the main reasons to get an Arc Flash Risk Assessment is because the explosion that occurs is known to cause serious damage. With the extreme temperatures of the blast, burns account for around 80% of all the injuries. Any employee not wearing the proper Personal Protective Equipment (PPE) are also at risk of electric shock, blindness, shrapnel wounds, and in some cases death. The damage to your facility can also lead to problems such as lengthy downtime, extensive repairs, and even loss of profit. Often times a simple adjustment to your electrical systems like the breaker settings or the installation of a breaker disconnect can really help to reduce accidents.

Another reason for having an Arc Flash Risk Assessment completed is simply because it is required by OSHA. In 2014 OSHA recognized an arc flash as a “hazard” and after that, the OSHA General Duty Clause began to cover arc flash explosions. All employers need to properly implement and document electrical safety programs that direct activity to the risks involved. All Companies must now comply and have an Arc Flash Risk Assessment completed every 5 years. The leading standard and best practice in electrical safety is the NFPA 70E Handbook. Two main points from the handbook would be that the employer is required to conduct an assessment, and must hand out the proper PPE if a potentially dangerous situation arises.

Having an Arc Flash Risk Assessment completed by qualified and trained professionals is highly important. Are you ready? Contact the experienced Arc Flash specialists at Thompson Automation and Specialty Services today to perform an arc flash analysis for your facility, complex, office, or campus.

For more information contact:

Phone: 844-321-3869

Email: sales@thompsonspecialty.com

Website: www.thompsonspecialty.com

 

Thermal Imaging is a Critical Piece of EPM

CoreGoodImage2

Electrical systems, just like mechanical systems, are prone to failure over time due to age, poor maintenance, and the stress of overuse.  People often wrongly assume that because electrical systems lack moving parts there is not a need for electrical preventative maintenance (EPM).  Nothing could be further from the truth.  While no one can claim to be perfect at identifying electrical problems before they arise, a good preventative maintenance program can help predict the imminent failure of equipment.   The early detection of problems can allow you to catch small issues before they become big ones.  A challenge faced, however, is the determination of what the right EPM program is.

While there is not a single EPM program or field of study that would catch all problems the most reliable and cost-effective inspection to have conducted is Thermal Imaging. Thermal Imaging is a non-contact, non-destructive technology proven effective in the early detection of imminent failure in an electrical and mechanical system. When properly conducted a Thermal Imaging inspection can identify “hot spots” or areas of a potential problem that necessitate further investigation and maintenance.  As you can see in this image, an area of concern is identified for further evaluation by the heat or temperature difference it is putting off against the ambient temperature.

If you have more questions or are looking for ideas and more information on Thermal Imaging or other best practice electrical preventative maintenance programs give the experts at Thompson Automation and Specialty Services a call today.  Given their 85+ years of experience as an electrical contractor, Thompson specializes in the development of custom electrical preventative maintenance programs for customers across the country.  Thompson understands the importance of keeping facilities safe, efficient and operating at peak performance and can custom tailor a program for you.